All our Machines are Available in Stock for Immediate Delivery !!!
Liners (Round Ends)
Reference
MEL-ECA-093
Technical Information
- Tool: Ø 100 mm paint rings
- Max. diameter: 125 mm
- Max. output: 250 ends/min
![](http://www.mel.es/wp-content/uploads/2023/11/MEL-ECA-093-01-225x300.jpg)
More pictures and video
Fmi
Press (Automatic)
Reference
MEL-PRA-063
Technical information
- Tonnage: 30 tons
- Tool: No
- Max. output: 200 strokes per minute
- Stroke: 85 mm
- Min – Max width of strip: 50 – 175 mm
- Min – Max length of strip: 500 – 900 mm
- Max. diameter of cutting edge (single die): 170 mm
- Max. diameter of cutting edge (double die): 92 mm
- Pneumatic clutch
![](http://www.mel.es/wp-content/uploads/2023/11/MEL-PRA-063-01-225x300.jpg)
More pictures and video
Fmi
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-060
Technical Information
- With sheet feeder
- With Strip feeder from scroll shear to automatic press
- Tool: Guillotine
- Max. sheet size: 1050 x 1050 mm
![](http://www.mel.es/wp-content/uploads/2024/02/MEL-CZS-060-01-300x225.jpg)
More pictures and video
Fmi
Press (Automatic)
Reference
MEL-PRA-050
Technical information
- Tonnage: 30 tons
- Tool: Ø 88 mm (single die)
- Max. output: 200 strokes per minute
- Stroke: 85 mm
- Min – Max width of strip: 50 – 180 mm
- Min – Max length of strip: 500 – 850 mm
- Max. diameter of cutting edge (single die): 175 mm
- Max. diameter of cutting edge (double die): 95 mm
- Mechanical clutch
![Fmi Mod. 1221](http://www.mel.es/wp-content/uploads/2017/09/MEL-PRA-050-01-225x300.jpg)
More pictures and video
Fmi
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
REFERENCE
MEL-CZS-044
Technical Information
- With sheet feeder and stacker
- Tool: 1/4 CLUB
- Max. sheet size: 1050 x 1050 mm
![MEL-CZS-044 01](http://www.mel.es/wp-content/uploads/2014/01/MEL-CZS-044-01-300x225.jpg)
More pictures and video
Fmi
Beaders
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-BH-014
Technical Information
- Tool: Ø 73 mm (15 fine centered beads. Distance between beads: 4 mm)
- 6 stations
- Max. output: 300 cans/min
- Diameter range: Ø 65 – Ø 120 mm
- Height range: 65 – 170 mm
![MEL-BH-014 01](http://www.mel.es/wp-content/uploads/2013/11/MEL-BH-014-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Combined Machines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PLM-013
Technical Information
- Flanger + Beader
- Tool: Ø 153 mm
- 6 stations
- Diameter range: Ø 65 – Ø 165 mm
- Height range: 60 – 285 mm
- Max. output: 250 cans/min
![MEL-PLM-013 01](http://www.mel.es/wp-content/uploads/2010/11/MEL-PLM-013-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Curlers (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-VCT-044
Technical Information
- Max. diameter: 175 mm
- Max. output: 150 ends/min
![MEL-VCT-044 01](http://www.mel.es/wp-content/uploads/2010/06/MEL-VCT-044-01-225x300.jpg)
More pictures and video
Fmi
Flangers (Irregular Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PF-032
Technical Information
- Tool: RR Asparagus (81 x 156 mm)
- 5 stations
- Min. can size: 30 x 60 mm
- Max. can size: 81 x 156 mm
- Height range: 40 – 170 mm
- Max. output: 120 cans/min
![MEL-PF-032 01](http://www.mel.es/wp-content/uploads/2008/11/MEL-PF-032-01-225x300.jpg)
More pictures and video
Fmi
Liners (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-ECA-074
Technical Information
- Tool: Ø 153 mm
- Max. diameter: 175 mm
- Max. output: 250 ends/min
- With vertical gas oven Ocsan
- With electronic compound injector Grace mod. MK-III
![MEL-ECA-074 01](http://www.mel.es/wp-content/uploads/2009/03/MEL-ECA-074-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Scroll Shears
Reference
MEL-CZS-041
Technical Information
- Tool: Ø 52.5 mm
- Max. sheet size: 915 x 915 mm
![MEL-CZS-041 01](http://www.mel.es/wp-content/uploads/2008/09/MEL-CZS-041-01-225x300.jpg)
More pictures and video
Fmi
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-028
Technical Information
- Tool: Ø 99 mm
- 6 stations
- Max. output: 300 cans/min
- Diameter range: 40-110 mm
- Height range: 35-160 mm
![MEL-PC-028 01](http://www.mel.es/wp-content/uploads/2008/05/MEL-PC-028-01-300x225.jpg)
More pictures and video
Fmi
Liners (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-ECA-060
Technical Information
- Tool: Ø 153 mm
- Max. output: 150 ends/min
- Max. diameter: 175 mm
![MEL-ECA-060 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-ECA-060-01-300x225.jpg)
More pictures and video
Fmi
Liners (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-ECA-045
Technical Information
- Tool: Ø 65 and Ø 84 mm
- Max. output: 250 ends/min
- Max. diameter: 125 mm
![MEL-ECA-045 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-ECA-045-01-225x300.jpg)
More pictures and video
Fmi
Liners (Round Ends)
Reference
MEL-ECA-044
Technical Information
- Tool: Ø 99 mm
- Max. output: 250 ends/min
- Max. diameter: 125 mm
![](http://www.mel.es/wp-content/uploads/2022/09/MEL-ECA-044-01-225x300.jpg)
More pictures and video
Fmi
Curing Ovens For Ends
Reference
MEL-HVT-007
Technical Information
- Gas
- Max. diameter: 155 mm
![MEL-HVT-007 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-HVT-007-01-225x300.jpg)
More pictures and video
Fmi
Curlers (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-VCT-035
Technical Information
- Tool: Ø 73 mm
- Max. diameter: 125 mm
- Max. output: 400 ends/min
![MEL-VCT-035 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-VCT-035-01-300x225.jpg)
More pictures and video
Fmi
Curlers (Round Ends)
Reference
MEL-VCT-031
Technical Information
- Tool: Ø 73 mm
- Max. diameter: 125 mm
- Max. output: 400 ends/min
![MEL-VCT-031 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-VCT-031-01-225x300.jpg)
More pictures and video
Fmi
Curlers (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-VCT-014
Technical Information
- Tool: Ø 99 mm
- Max. diameter: 125 mm
- Max. output: 400 ends/min
![MEL-VCT-014 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-VCT-014-01-300x225.jpg)
More pictures and video
Fmi
Curlers (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-VCT-012
Technical Information
- Tool: Ø 52.5 mm
- Max. diameter: 125 mm
- Max. output: 400 ends/min
![MEL-VCT-012 01](http://www.mel.es/wp-content/uploads/2010/06/MEL-VCT-012-01-225x300.jpg)
More pictures and video
Fmi
Curlers (Round Ends)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-VCT-011
Technical Information
- Tool: Ø 83.7 mm
- Max. diameter: 125 mm
- Max. output: 400 ends/min
![MEL-VCT-011 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-VCT-011-01-300x225.jpg)
More pictures and video
Fmi
Press (Automatic)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PRA-038
Technical Information
- Tonnage: 30 tons
- Tool: No
- Max. output: 350 ends/min (double die)
- Stroke: 85 mm
- Pneumatic clutch
![MEL-PRA-038 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PRA-038-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Press (Automatic)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PRA-024
Technical Information
- Tonnage: 30 tons
- Tool: No
- Max. output: 350 ends/min (double die)
- Stroke: 85 mm
- Pneumatic clutch
![MEL-PRA-024 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PRA-024-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Press (Automatic)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PRA-015
Technical Information
- Tonnage: 30 tons
- Tool: No
- Max. output: 350 ends/min (double die)
- Stroke: 85 mm
- Pneumatic clutch
![MEL-PRA-015 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PRA-015-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-035
Technical Information
- With sheet feeder and stacker
- Tool: No
- Max. sheet size: 915 x 915 mm
![MEL-CZS-035 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZS-035-01-300x225.jpg)
More pictures and video
Fmi
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-027
Technical Information
- With sheet feeder and stacker
- Tool: Ø 99 mm
- Max. sheet size: 1050 x 1050 mm
![MEL-CZS-027 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZS-027-01-300x225.jpg)
More pictures and video
Fmi
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-026
Technical Information
- With sheet feeder and stacker
- Tool: Ø 73 mm
- Max. sheet size: 1050 x 1050 mm
![MEL-CZS-026 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZS-026-01-300x225.jpg)
More pictures and video
Fmi
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZM-025
Technical Information
- With sheet feeder
- Tool: No
- Max. sheet size: 1120 x 1120 mm
- Pneumatic clutch
![MEL-CZM-025 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZM-025-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZM-024
Technical Information
- With sheet feeder
- Tool: No
- Max. sheet size: 1120 x 1120 mm
- Pneumatic clutch
![MEL-CZM-024 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZM-024-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-019
Technical Information
- With sheet feeder and stacker
- Tool: No
- Max. sheet size: 1120 x 1120 mm
- Pneumatic clutch
![MEL-CZS-019 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZS-019-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Scroll Shears
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CZS-001
Technical Information
- With sheet feeder and stacker
- Tool: Ø 83.7 mm
- Max. sheet size: 1100 x 1100 mm
![MEL-CZS-001 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CZS-001-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Complete Endmaking Lines
Reference
MEL-LT-018
Technical Information
- Tool: Ø 153 mm
- Output: 110 ends/min
- Consisting of:
- Automatic press Fmi-Mecfond mod. A-705 (30 Tn) Pneumatic clutch
- Single die (carbide)
- Single curler Fmi 1241
- Magnetic conveyor
- Liner LOMAS mod. ELA with electronic compound injector Grace mod. MK-III
- Vertical gas oven
![](http://www.mel.es/wp-content/uploads/2008/04/MEL-LT-018-01-1-300x225.jpg)
More pictures and video
Fmi Mecfond
Complete Endmaking Lines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-LT-016
Technical Information
- Tool: Ø 62 and Ø 65 mm double
- Output: 600 ends/min
- Consisting of:
- Scroll shear Fmi-Mecfond mod. A-181 with sheet feeder
- Feeder scroll strip
- Automatic press Fmi-Mecfond mod. A-701 (30 Tn), with double die
- Double curler Fmi-Mecfond mod. A-754
- Magnetic conveyors
- Double liner Fmi-Mecfond mod. A-833 with electronic compound injector Grace mod. MK-IV
- Double vertical gas oven Fmi-Mecfond mod. A-856
- Artificial vision system SACMI for ends control
- Ends stacker with magnetic rolls
![MEL-LT-016 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-LT-016-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Complete Endmaking Lines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-LT-014
Technical Information
- Tool: Ø 153 mm
- Output: 110 ends/min
- Automatic press FMI mod. A-705, 30 Tons, with neumatic clutch
- Single die Ø 153 for press
- Curler FMI mod.1241
- Magnetic conveyor of curler to liner
- Liner FMI mod. 1262, with electronic compound injector Grace mod. MK-III
- Vertical gas oven FMI
- Ends stacker with magnetic rolls
- Electrical panel of maneuver and control of the line
![MEL-LT-014 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-LT-014-01-300x225.jpg)
More pictures and video
Fmi
Complete Endmaking Lines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-LT-013
Technical Information
- Tool: Ø 153 mm
- Output: 110 ends/min
- Automatic press FMI mod. A-705, 30 Tons, with neumatic clutch
- Single die Ø 153 for press
- Curler FMI mod.1241
- Magnetic conveyor of curler to liner
- Liner FMI mod. 1262, with electronic compound injector Grace mod. MK-III
- Vertical gas oven FMI
- Ends stacker with magnetic rolls
- Electrical panel of maneuver and control of the line
![MEL-LT-013 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-LT-013-01-300x225.jpg)
More pictures and video
Fmi
Complete Endmaking Lines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-LT-012
Technical Information
- Tool: Ø 99.5 and Ø 96 mm double
- Output: 450 ends/min
- Consisting of:
- Scroll shear Fmi mod. 12111 with sheet feeder
- Feeder scroll strips
- Automatic press Fmi mod. 1222 (45 Tn), with double die
- Double curler Krupp
- Magnetic conveyors
- Double liner Fmi-Mecfond mod. A-803 with electronic compound injector Grace mod. MK-IV
- Double Vertical gas oven Meritermica mod. 4BF/2
- Double Ends stacker with magnetic rolls
![MEL-LT-012 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-LT-012-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Combined Machines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PLM-003
Technical Information
- Flanger + Beader
- Tool: Ø 73 and Ø 88 mm
- 6 stations
- Diameter range: Ø 65 – Ø 130 mm
- Height range: 60 – 170 mm
- Max. output: 300 cans/min
![MEL-PLM-003 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PLM-003-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC-043
Technical Information
- Tool: Ø 73 and Ø 88 mm
- 6 stations
- Diameter range: 50 – 110 mm
- Height range: 40 – 270 mm
- Max. output: 325 cans/min
- Driven lifters
![MEL-CC-043 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-043-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC-038
Technical Information
- Tool: Ø 99 mm
- 4 stations
- Diameter range: 99 – 165 mm
- Height range: 100 – 245 mm
- Max. output: 150 cans/min
![MEL-CC-038 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-038-01-300x225.jpg)
More pictures and video
Fmi
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC–026
Technical Information
- Tool: Ø 99 mm
- 6 stations
- Diameter range: 50 – 110 mm
- Height range: 40 – 160 mm
- Output: 275 cans/min
![MEL-CC-026 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-026-01-300x225.jpg)
More pictures and video
Fmi
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC–014
Technical Information
- Tool: Ø 127 mm
- 4 stations
- Diameter range: 99 – 165 mm
- Height range: 100 – 245 mm
- Max. output: 150 cans/min
![MEL-CC-014 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-014-01-225x300.jpg)
More pictures and video
Fmi
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC–013
Technical Information
- Tool: Ø 153 mm
- 4 stations
- Diameter range: 99 – 165 mm
- Height range: 100 – 245 mm
- Max. output: 150 cans/min
![MEL-CC-013 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-013-01-225x300.jpg)
More pictures and video
Fmi
Seamers (Automatics Round Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-CC–002
Technical Information
- Tool: Ø 83.7 mm
- 6 stations
- Diameter range: 50 – 110 mm
- Height range: 40 – 270 mm
- Max. output: 350 cans/min
- Driven lifters
![MEL-CC-002 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-CC-002-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Beaders
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-BH-010
Technical Information
- Tool: Ø 99 mm
- 8 stations
- Diameter range: Ø 100 – Ø 165 mm
- Height range: 80 – 270 mm
- Max. output: 300 cans/min
![MEL-BH-010 01](http://www.mel.es/wp-content/uploads/2013/11/MEL-BH-010-01-300x225.jpg)
More pictures and video
Fmi
Beaders
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-BH-005
Technical Information
- Tool: Ø 73 mm
- 12 stations
- Max. output: 550 cans/min
![MEL-BH-005 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-BH-005-01-225x300.jpg)
More pictures and video
Fmi
Beaders
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-BH-004
Technical Information
- Tool: Ø 153 mm
- 6 stations
- Max. output: 250 cans/min
![MEL-BH-004 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-BH-004-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Parting Machines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-SP-003
Technical Information
- Tool: Ø 153 mm
- 6 stations
- Diameter range: Ø 65 – Ø 165 mm
- Height range: 60 – 285 mm
- Max. output: 500 cans/min (250 cut/min)
More pictures and video
Fmi Mecfond
Beaders
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-BH-002
Technical Information
- Tool: Ø 99 mm
- 6 stations
- Diameter range: Ø 65 – Ø 120 mm
- Height range: 65 – 170 mm
- Max. output: 300 cans/min
![MEL-BH-002 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-BH-002-01-300x233.jpg)
More pictures and video
Fmi Mecfond
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-024
Technical Information
- Tool: Ø 73 mm
- 8 stations
- Max. output: 400 cans/min
![MEL-PC-024 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-024-01-225x300.jpg)
More pictures and video
Fmi
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-022
Technical Information
- Tool: Ø 99 mm
- 6 stations
- Max. output: 300 cans/min
- Diameter range: 40-110 mm
- Height range: 35-160 mm
![MEL-PC-022 01](http://www.mel.es/wp-content/uploads/2008/08/MEL-PC-022-01-300x225.jpg)
More pictures and video
Fmi
Flangers & Spin-Flangers (Rounds Cans)
Reference
MEL-PC-020
Technical Information
- Tool: Ø 153 mm
- 6 stations
- Max. output: 250 cans/min
- Diameter range: 99-165 mm
- Height range: 80-245 mm
![MEL-PC-020 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-020-01-300x225.jpg)
More pictures and video
Fmi
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-019
Technical Information
- Tool: Ø 99 mm
- 6 stations
- Max. output: 250 cans/min
![MEL-PC-019 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-019-01-225x300.jpg)
More pictures and video
Fmi
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-018
Technical Information
- Tool: Ø 65 mm
- 8 stations
- Max. output: 425 cans/min
- Diameter range: 50 – 110 mm
- Height range: 33 – 160 mm
![MEL-PC-018 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-018-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-013
Technical Information
- Tool: Ø 127 mm
- 6 stations
- Max. output: 250 cans/min
- Diameter range: 99-165 mm
- Height range: 80-310 mm
![MEL-PC-013 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-013-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-012
Technical Information
- Tool: Ø 153 mm
- 6 stations
- Max. output: 250 cans/min
![MEL-PC-012 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-012-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-009
Technical Information
- Tool: Ø 52.5 mm
- 8 stations
- Max. output: 400 cans/min
![MEL-PC-009 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-009-01-225x300.jpg)
More pictures and video
Fmi Mecfond
Flangers & Spin-Flangers (Rounds Cans)
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-PC-005
Technical Information
- 8 stations
- Diameter Range: 50-130 mm
- Height Range: 40-270 mm
- Max. output: 550 cans/min
![MEL-PC-005 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-PC-005-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Neckers
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-NC-004
Technical Information
- Tool: Ø 65 / Ø 62 mm
- 8 stations
- Max. output: 425 cans/min
- Diameter range: 65-100 mm
- Height range: 50-180 mm
![MEL-NC-004 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-NC-004-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Neckers
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-NC-003
Technical Information
- Tool: Ø 73 / Ø 70 mm
- 9 stations
- Max. output: 450 cans/min
![MEL-NC-003 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-NC-003-01-300x225.jpg)
More pictures and video
Fmi Mecfond
Parting Machines
![sold sold](http://www.mel.es/wp-content/images/sold.gif)
Reference
MEL-SP-002
Technical Information
- Tool: Ø 65 mm (44 x 2) mm height
- 8 stations
- Diameter range: Ø 52 – Ø 165 mm
- Height range: 75 -250 mm
- Diameter cut: Ø 45 mm
- Max. output: 700 cans/min (350 x 2)
![MEL-SP-002 01](http://www.mel.es/wp-content/uploads/2008/04/MEL-SP-002-01-300x225.jpg)
More pictures and video
Fmi Mecfond